Bumblebee Linens

Product Type
Thin-Film Composite

Dimension
40 in x 4.0 in

Product Specifications

Product Flow Rate Salt Rejection (%)
(GPD) (m³/d) Monovalent / Divalent
2,400 9.1 99.7

• The stated product performance is based on data taken after 30 minutes of operation at the following test conditions:
• 2,000 mg/L NaCl solution at 225 psig ( 1.5 MPa) applied pressure
• 15% recovery
• 77°F (25°C)
• pH 6.5 –7.0
• Minimum salt rejection is 99.5%.
• Permeate ow rate for each element may vary but will be no more than 15%.
• All elements are vacuum sealed in a polyethylene bag containing 1.0% SBS (sodium bisulte) solution and individually packaged in a cardboard box.
Maximum Operating and Cleaning Limits

Pressure Drop / Element Pressure Drop / 240″ Vessel Operating Pressure Feed Flow Rate Min. Concentrate Flow Rate Operating Temperature Operating pH Range CIP pH Range Turbidity NTU SDI Chlorine Concentration
15 psi (0.1 MPa) 60 psi (0.41 MPa) 600 psi (4.14 MPa) 18 gpm (4.09 m³/hr) 4 gpm (0.91 m³/hr) 113°F (45°C) 2.0–11.0 1.0–13.0 1.0 NTU SDI 5 < 0.1 mg/L